♦ 機型：HJ-SMDFMT-100 ( Model No.：HJ-SMDFMT-100 )
ㄧ、機台說明 Machine Description
LED半自動前測機主要應用於LED點膠製程完成後確認光色,並驗證或調整點膠機參數設定之用;本機台可方便使用者於支架未切成單顆前,將支架置於置料座進行單顆點亮測試,並可於任何情況下進入SAMPLE校正模式,測試方式可依使用者需求搭配量測鏡頭或積分球,不受空間限制.
LED Semi-Auto Sorting Machine of mainly applies completes after the LED rubber system regulation confirms the light color, and confirms or set point dotting machine parameter hypothesis; the main functions of may facilitate the user not to sliver Shan keqian in the support, puts in the support sets at the material place to carry on single to lighten the test, and may enter the SAMPLE adjustment pattern in any situation, the test mode may depend on the user demand matching gauging lens or the integral ball, not space limitation.
二、產品特性 Product Features
■ SAMPLE校正不需更換治具,操作方便。
Sample adjusts cannot replace the fixture, the ease of operation
■ 使用探針由材料下方頂昇測試,避免遮光情形。
Uses the probe to go against by the material underneath rises to test, avoids shielding light the situation.
■ 依材料型式不同更換置料板及探針,共用性高。
According to the material pattern different hyperphoric yard lumber and the probe, reusable is high.
■ 30組參數設定,不需反覆設定測試位置。
30 group of parameter hypotheses, cannot establish the testing position repeatedly.
■ 置料區安全光閘,保護作業人員安全。
Shutters are installed to prevent human injuries.
■ 量測鏡頭&積分球皆可使用,不受空間限制。
Gauging lens & The integral ball all may use, not space limitation.
三、產品規格 Product Specifications
|
機台產能 Machine capacity |
PPH≧4k;測試時間testing time≦50ms |
|
電源規格 Power Specifications |
AC220V/60HZ |
|
氣壓規格 Pressure Specifications |
5-6kg/cm² |
|
機台尺寸 Machine Size |
寬W75*深D64*高H160 cm weight重量：250kg |