SMD自動點膠機 Auto Dotting Machine

Hits: 3273
Model No.:HJ-SMDAP-130

♦ 機型:HJ-SMDAP-130 ( Model No.:HJ-SMDAP-130 )

ㄧ、機台說明 Machine Description

泓傑科技針對SMD材料所開發的全自動高速型點膠機;本機台功能是自動彈匣對彈匣Loading&UNLoading 將SMD材料載入進行點膠動作,達到全自動點膠功能,並搭配真空吸膠機制,使點膠穩定性更高。

Designed to work with SMD materials, the main function of this fully automatic, high-speed Auto Dotting Machine developed by HON-JER Technology co., Ltd .Is the automatic magazine to magazine Loading& UNLoading writes down the SMD material carries on the rubber movement, is to fully automate the dotting process by collecting SMD material, dotting glue. It is fitted with a vacuum suction function to ensure a stable dotting process.

二、產品特性 Product Features

■ 本產品最高可搭配8支5c.c.針筒同時進行點膠,大幅提升點膠速度。(依材料不同可做變更)

Eight 5c.c. needle tips can be used concurrently to increase dotting speed. (Different may make the change according to the material)

每支針頭均由針頭固定板固定,定位公差±02mm,避免側溢膠情形發生。

Each needle tip is secured with a fastening plate and with 0.02mm position tolerance to prevent any spillage.

每次吐膠後均有吸除針頭周圍殘膠動作,避免殘膠影響下次吐膠量,且完全不影響點膠速度。

Residual epoxy around needle tips is removed after each dotting without affecting the dotting speed.

吸膠盒功能,避免擦膠造成污染問題。

Built-in epoxy suction function to prevent pollution from the epoxy.

快速更換膠筒,不需重覆校正位置。

The fast replacement rubber tube, does not need the recalibration position.

高精度螺桿,並搭配伺服馬達控制,精準度高。

High-precision lead screws and server-controlled motors improve accuracy.

設備可依客戶材料變化,更換不同治具,達到ㄧ機多用功能。

The machine is multi-functional as clients can install different gauge according to material changes.

軌道加熱功能。

Orbital heating function.

搭配自行研發高精密點膠控制器,使用電控比例閥數位調整,時間誤差控制於±1ms。

Matching researches and develops the high precise spot rubber controller voluntarily, the use electrically controlled proportioning valve several adjustments, the time error controls in ±1m

每台點膠控制器均可依使用者需求單機使用,均附儲氣瓶,穩壓效果更勝一般控制器。

Each spot rubber controller may depend on the user demand single plane use, attaches the air bottle, the constant voltage effect wins the common controller.

三、產品規格  Product Specifications

機台產能

Machine capacity

PPH≧16K/點膠時間dotting time≦0.25sec(8支針頭組 8 needle tip set)

電源規格 

Power Specifications

AC220V/60HZ

氣壓規格

Pressure Specifications

5-6kg/cm²

機台尺寸 

Machine Size

寬W130*深D92*高H205 cm 

Weight重量 : 580KG

Comming Soon
Copyright MAXXmarketing Webdesigner GmbH

泓傑科技有限公司

新北市樹林區中華路379巷78弄18號
No.18, Alley 78, Lane 379,Zhonghua Rd.,Shu-Lin District, New Taipei 23858, Taiwan (R.O.C)
TEL :+886-2-8686-2838
FAX :+886-2-8686-1386
Email:Email住址會使用灌水程式保護機制。你需要啟動Javascript才能觀看它