前測機 Semi-automatic pre-test machine

Hits: 4052
Model No.:HJ-FST-200

♦ 機型:HJ-FST-200 ( Model No.:HJ-FST-200 )

ㄧ、機台說明 Machine Description 

LED半自動前測機主要應用於LED點膠製程完成後確認光色,並驗證或調整點膠機參數設定之用;本機台可方便使用者於支架未切成單顆前,將支架置於置料座進行單顆點亮測試,並可於任何情況下進入SAMPLE校正模式,測試方式可依使用者需求搭配量測鏡頭或積分球,不受空間限制.

LED Semi-automatic pre-test machine is mainly used in pre-test LED dot dispensing process to confirm the completion of the light color, verify or adjust the dispensing parameters setting; This machine makes it easier to cut the bracket does not form front, the stand over the set material seat single lit test.Enter the SAMPLE correction mode in any case.The test is designed for users with demand measurement lens or integrating sphere, not restricted by space.

二、產品特性 Product Features

■ SAMPLE校正不需更換治具,操作方便。

■ SAMPLE correction does not need to replace the fixture and easy to operate.

下探式&上探式&測夾式均可使用。

■ Lower detection & on the detection type & measuring clip measurement type can be used.

依材料型式不同更換置料板及探針,共用性高。

■ According to the type of materials to replace the set plate and probe, high shared.

30組參數設定,不需反覆設定測試位置。

■ 30 group parameter setting, without repeatedly set the test position.

LED距離積分球口<5mm,避免漏光造成誤差

■ Integrating sphere port <5mm LED distance to avoid leakage of light causing errors

置料區安全光閘,保護作業人員安全。

■ Reset the security shutter, protection of workers ' safety.

CIE鏡頭&積分球皆可使用,不受空間限制。

■ CIE lens and integrating spheres can be used without space constraints.

最大可搭配30cm積分球。

■ Max can be used with 30cm integrating sphere.

PC觸控介面,操作方便。

■ PC touch interface, easy to operate.

積分球升降&位移功能,方便維修人員調整機台。

■ The integrating sphere Lift and shift functions, ease of maintenance personnel adjust machine.

凸輪頂昇測試結構,速度提升>50%。

■ Cam lift test structure faster on >50%.

三、產品規格 Product Specifications

機台產能

Machine capacity

PPH≧8k;測試時間Test time≦30ms

電源規格

Power Specifications

AC220V, 15A, 50/60Hz

氣壓規格

Pressure Specifications

5-6kg/cm²   

機台尺寸

Machine Size

寬W156*深D79*高H164 cm

weight重量:260 kg

Comming Soon
Copyright MAXXmarketing Webdesigner GmbH

泓傑科技有限公司

新北市樹林區中華路379巷78弄18號
No.18, Alley 78, Lane 379,Zhonghua Rd.,Shu-Lin District, New Taipei 23858, Taiwan (R.O.C)
TEL :+886-2-8686-2838
FAX :+886-2-8686-1386
Email:Email住址會使用灌水程式保護機制。你需要啟動Javascript才能觀看它